Slicers
ZAFFIRA LX 330 AUT
- Rounded design, no sharp edges and visibile screws.
- Chrome plated and ground slide rod.
- Lapped cast iron slide rod bushing.
- Vulcanized rubber stops on carriage.
- Removable support cover for thickness gauge plate.
- Stainless steel slice deflector with bayonet fitting.
- Stainless steel screws and fittings.
- Enclosed and sealed belt pulley.
- 49,5 mm distance between blade and motor.
- Bottom cover.
- Power source 220V.
- Built in sharpening tool with bottom protection.
- Standard blade removal tool.
- Ergomic controls – push buttons with IP67 protection rating.
- 3 speed selection
- 3 different adjustments for carriage travel.
- Slice counter.
- Slice number setting with automatic stop feature.
- Uniko hopper
- Enclosed and sealed drive motor.
- Positive drive belt.
- Carriage release system for manual slicing.
- Output slicers per minute: 34 - 70
Optional accessories:
- Carriage “Nettuno” available with a special end weight and an adjustable vertical product fence to provide stability and advance products evenly
- Food fence
Product details
| Model | ZAFFIRA LX 330 AUT.UNK. CE 230/50/1 |
| ø Blade | mm 330 - inch. 13 |
| Motor | watt 275+200 - Hp 0,37+0,27 |
| Cut thickness | mm 23 |
| Run of carriage | mm 310 |
| Hopper | mm 365x270 |
| A | mm 465 |
| B | mm 340 |
| C | mm 645 |
| D | mm 660 |
| E | mm 455 |
| F | mm 730 |
| G | mm 650 |
| L | mm 585 |
| X | mm 240/270 |
| Y | mm 210 |
| H | mm 260 |
| W | mm 240 |
| Net weight | kg 39 |
| Shipping | mm 870x840x750 |
| Gross weight | kg 54 |
| HS-CODE | 84385000 |
