- Rounded design, no sharp edges and visibile screws. - Chrome plated and ground slide rod. - Lapped cast iron slide rod bushing. - Vulcanized rubber stops on carriage. - Removable support cover for thickness gauge plate. - Stainless steel slice deflector with bayonet fitting. - Stainless steel screws and fittings. - Enclosed and sealed belt pulley. - 49,5 mm distance between blade and motor. - Bottom cover. - Built in sharpening tool with bottom protection. - Standard blade removal tool. - Controls – push buttons with IP67 protection rating. - 3 speed selection - 3 different adjustments for carriage travel. - Slice counter. - Slice number setting with automatic stop feature. - Carriage “U” with an adjustable fence and product locking bracket that can be positioned according to the size of the product to help contain it and feed it toward the blade. - Enclosed and sealed drive motor. - Positive drive belt. - Carriage release system for manual slicing. - Output slicers per minute: 34 - 70 Optionals: - Carriage with increased length, equipped with adjustable guides to align and feed one or multiple products in parallel, and a specially designed product press bracket with increased weight to push the product toward the blade. - Fish slicing slide to be fixed on the "U" tray: . Maximum product dimensions: 170 x 88h mm. . Adjustable cutting angle up to 50°. . Product temperature close to 0°C, preferably -5°C / -6°C. - Tube for cutting vegetables. - Lifting lever.