Slicers
ZAFFIRA 370 CL
- Rounded design, no sharp edges and visibile
screws.
- Chrome plated and ground slide rod.
- Self lubricating slide rod bushings.
- Vulcanized rubber stops on carriage.
- Removable support cover for thickness gauge
plate.
- Stainless steel slice deflector.
- Blade pulley without centre hole to facilitate
cleaning.
- Adjustable slicer table movement in the first
3 mm of opening, guarantees higher cutting
precision of thin slices.
- Safety ring on table shaft to prevent liquids from
seeping inside the machine.
- Easily removable blade cover
- Stainless steel screws and fittings.
- Enclosed and sealed belt pulley.
- 49,5 mm distance between blade and motor.
- Bottom cover.
- Changeover electronic circuit 110-220V single or 220-280V three phase.
- Built in sharpening tool with bottom protection.
- Standard blade removal tool.
- 35° blade inclination.
- Plastic knob.
- Rubber feet.
- Buttons in insulated stainless steel (IP 67) in housing.
Product details
| Model | ZAFFIRA 370 CL 230/MN CE |
| ø Blade | mm 370 - inch 15 |
| Motor | watt 370 - Hp 0,50 |
| Cut thickness | mm 23 |
| Run of carriage | mm 355 |
| Hopper | mm 330x307 |
| A | mm 513 |
| B | mm 340 |
| C | mm 735 |
| D | mm 580 |
| E | mm 470 |
| F | mm 840 |
| G | mm 590 |
| L | mm 660 |
| X | mm 307 |
| Y | mm 230 |
| H | mm 285 |
| W | mm 260 |
| Net weight | kg 39 |
| Shipping | mm 760x640x700 |
| Gross weight | kg 48 |
| HS-CODE | 84385000 |
